1. Home |
  2. Total - Station

Leica Total Station TDRA6000


The new Leica TDRA6000 introduces new and improved technology. With an all new direct drive technology, reflectorless measurements and a typical 3D point accuracy of 0.25 mm at 35 meters, this new generation of Laser Station incorporates Leica Geosystems' long experience developing industrial laser stations.

The new Leica TDRA6000 is the most accurate total station ever designed for industrial use. This new Leica Geosystems laser station has the ability to automatically target both CCR and tape targets and can even measure without targets maintaining a typical reflectorless accuracy of 1 mm. Optimized for use within 300 meters and combined with the Leica Geosystems PowerSearch module, the new Leica TDRA6000's tracking performance is simply unbeatable.

An all new Leica Geosystems proprietary direct drive technology has been designed from the ground up for this new sensor. Based on Piezo technology, these new direct drives enable high speed motorization and acceleration, at up to 4x the previous generation, but still allow sub micron level fine positioning. This technology has very low power consumption, requires almost no maintenance and is near silent.

Combined with the right software package like DCP05 or Microlog, the Leica TDRA6000 is a top level solution for industrial metrology.
The measurement uncertainty of a coordinate “Uxyz” is defined as the deviation between a measured coordinate and the nominal coordinate of that point. This measurement uncertainty is specified as a function of the distance between the Laser Station and the measured point. The accuracy specified below is achieved with Leica Geosystems 1.5” Red Ring reflectors and the “Precise” measurement mode. Specifications are stated in Maximum Permissible Error (MPE). Typical results are ½ MPE.

Uxyz ≤ 30 m volume ± 0.5 mm
Uxyz > 30 m volume ± 0.3 mm + 13 µm/m
Advanced search: 1,5’’ RRR & BRR
Max Volume: 100m
Min Distance: 2 m
Positioning time: <5s
Operating temperature : -20 °C to +50 °C
Dust/Water: (IEC 60529) IP54
Humidity: 95%(non-condensing)
The 3D Point Reproducibility “Pre” is defined as the standard deviation between multiple measurements of a 3D point and is specified as a function of the distance between the LaserStation and the measured point. The accuracy specified below is achieved with Leica Geosystems 0.5” TBR and/or RFI reflectors using the “Precise” measurement mode.

Pre ≤ 30 m volume ± 0.2 mm
1,5 ‘’ RRR & BRR
Max Volume: 600 m
Min DIstance: 2.0 m
Accuracy (MPE): 0.5 mm

0.5'' TBR & RFI
Max Volume: 600 m
Min Distance: 2.0 m
Accuracy (MPE): 0,5 mm

REFLECTIVE TOPE
Max Volume: 600m
Min Distance: 5.0m
Accuracy (MPE): 2.0m

NON CONTACT (RL)
Max Volume: 600m
Min Distance: 2.0m
Accuracy (MPE): 2.0mm
1.5'' RRR & BRR
Max Volume: 600m
Min DIstance: 2.0m
Accuracy (MPE): +/- 0.3 mm + 13 um/m

0.5'' TBR & RFI
Max Volume: 400m
Min Distance: 2.0m
Accuracy (MPE): N/A

REFLECTIVE TOP
Max Volume: 40m
Min Distance: 5.0 m
Accuracy (MPE): +/- 2 mm
Telescope Magnification: 30x
Focusing Range: 1.7 m to infinty
Keyboard and Display
Display: ¼ VGA; color, Touch; both faces
Keyboard: 34 keys, illuminated
Data storage
Internal memory: 256MB
Memory card: CompactFlash card 256 MB or 1 GB
Interfaces: RS232, Bluetooth® Wireless
Operation: Three endless drivers for one or two hand operation. Precision trigger key for manual measurements.
Power management: Internal power management: lithium.ion battery
External power management: AC power supply
Weight Laser Station incl. Battery: 7,6 kg

TS50 R1000


Angular accuracy 0.5" between total stations for engineering and monitoring, excels in robustness and precision.
The TS50 R1000 defines and reinforces the meaning of precision with its excellent combination of angle and distance measurement. At the same time, it offers extraordinary acceleration and speed for maximum efficiency, integrated panoramic and telescopic cameras and the latest intuitive Smartworx onboard software.
Angle Measurement. Accuracy 1Hz and V: Absolute, continuos, quadruple. 05”(0.15 mgon)
-Distance measurement. Range. Prism (GPR1, GPH1P): 1.5 m to 3500 m. Non-Prism / Any surface: 1.5 m to > 1000 m.
-Accuracy / Measurement time:
Single (prism): 0.6 mm + 1 ppm / typ. 2.4 s
Single (Any surface): 2 mm + 2 ppm / typ. 3 s
-Laser dot size : at 50 m : 8 mm x 20 mm
-Measurement technology: System Analyser: coaxial, visible red laser
-Imaging
-Overview and telescope camera:
Sensor: 5 Mpixel CMOS sensor
Field of view (overview / telescope): 19.4° / 1.5°
Frame rate: Up to 20 frames per second
Motorisation
-Direct drives based on Piezo technology:
Rotation speed: max. 200 gon (180°) / s
Time to Change Face: typ. 2.9 s
Automatic Aiming (ATR)
Range ATR mode / Lock mode
Circular prism (GPR1, GPH1P) 1000 m / 800 m
360° prism (GRZ4, GRZ122) 800 m / 600 m
Accuracy / Measurement time
ATR angle accuracy Hz, V: 0.5” (0.15 mgon) / typ. 3–4 s
PowerSearch
Range / Search Time: 360° prism (GRZ4, GRZ122): 300 m / typ. 5 s
Guide Light (EGL)
Working Range / Accuracy: 5–150 m / typ. 5 cm @ 100 m General
Autofocus Telescope: Magnification / Focus Range: 30 x / 1.7 m to infinity
Display and Keyboard: VGA, colour, touch, both faces: 36 keys, illumination
Operation: 3x endless drives, 1x Servofocus drive, 2x Autofocus keys, User-definable SmartKey
Power Management: Exchangeable Lithium-Ion battery with internal charging capability: Operating Time 7– 9 h
Data storage: Internal memory: 1GB
Memory card 1 GB SD card 1 GB or 8 GB
Interfaces: RS232, USB, Bluetooth®, WLAN
Weight: Total Station incl. Battery: 7.6 kg
Environmental specifications: Working temperature range: -20 °C TO +50 °C
Dust & Water (IEC 60529) / Blowing rain: IP65 / MIL-STD-810G, Method 506.5-I
Humidity 95%, non-condensing

TS15 R1000


The fastest Total Imaging Station on the market. With its 5 Kg. of weight, it is ideal for construction sites.

Partner